Solar Hot Water DIY System and Components
We offer vary size high efficiency pressurized evacuated heat pipe solar collectors and system for residential and commercial hot water application, DIY system saves homeowner initial investment in solar hot water up to 70% off comparing to traditional approach.
This system consists of collectors, external exchanger, 2 pumps, Differential temperature controller and conventional electric water heater as hot water storage, end user only need hook up 4 pipes connection, no solder required, only 30 minutes job, it is done!
Evacuated Tube Collector
Dimension (mm): 1635x1155x134
Number of vacuum tubes: 16
Gross weight (kg): 45
Pressurization (Mpa): 0.6
Hydra connection (in): 3/4
Glass tube: borosilicate Glass 3.3
Max operation pressure (Bar): 6
Max working temp (C): 250
Other Solar Hot Water component, e. g.
plate heat exchangers is available upon
request, visit AWE Solar Energy Technologies
for details about solar hot water system.
Differential Temperature Controller
Dimension: 120mm x120mm x 18mm
Power supply: AC110±10%
Power consumption: <3W
Input: 4 sensor: 1Pt100 sensor for collector, 2 NTC10k sensor for tank, 1 NTC 10k sensor for pump.
Outputs: 4 relays, 1 for electrical booster, 2 for circulation pumps, 1 for valve. What is in package?
1 Display, 1 Controller, 1 Manual, 1 PT1000 Sensor (for collector), 2 NTC10K Sensors (for tank), 1 Power Cable.
Reseller is welcome to contact.
Retail Price $136